thermal head

Investigation of driver ASIC for facsimile thermal printing head

传真机热印头驱动专用集成电路的研究

The thermal print head's driver control and protection of Micro-thermal printer

微型热敏打印机热敏打印头的驱动控制及保护

The thermal desorption modulator is a short, heated section at the head of the capillary column.

热解吸调制器是在毛细管柱前端的一段短的加热段.

Experimental Investigation on Thermal Load in Cylinder Head Fire-face of Air-Cooled IC Engines under Transient Condition

风冷内燃机缸盖火力面过渡工况下热负荷试验研究

Development of thin film thermal print head

薄膜热印头研制

Investigation of 2048 Dot Thin Film Thermal Printing Head in Facsimiles

传真机2048点薄膜热印头的研究

With the development of diesel engine, the heat transfer and thermal loading of cylinder head is of great importance increasingly.

随着柴油机的不断强化，气缸盖的传热与热负荷成为一个非常重要的研究方向。

Study of electronical test of thermal print head

热敏打印头电学性能测试

Design of the head of optical system of vehicle periscopic thermal imager

车载潜望式热像仪光学系统的头部设计

An Investigation of the Thermal Loading on Cylinder Head of the Hot Space in Stirling Engine

斯特林发动机热腔缸头的热负荷研究

As the increasing of engine duty, the thermal load of cylinder head has become a key factor which affects the performance of engine.

随着柴油机不断强化，缸盖热负荷已成为影响柴油机性能的重要因素。

Based on the analysis of the dynamic distortion camouflage technology, the calculation was offered as for the VTG 120 thermal imaging guidance head equipped by the TOW anti-tank missile.

本文在介绍动态变形伪装原理的基础上，以TOW反坦克导弹携带的VTG120热成像导引头为例进行了计算分析，结果表明，动态变形伪装能够使坦克等目标的生存概率大大提高。

The difference measuring method of the thermal units' resistance on the thermal printing head

热印头发热元件阻值一致性的差值测试法

An Automatic Test System for the Head Amplifier of Thermal Imager

红外热像仪头部放大器自动测试系统

By thermal printing head control the characteristics of the ARM host processor hardware resources in-depth analysis, based on a simplified system design, improving system integration and reliability, to facilitate system software development principles, to determine the hardware selection of the printer driver and program determined.

通过对热敏打印头控制特点以及ARM主控芯片硬件资源的深入分析，基于简化系统设计、提高系统集成度和可靠性、方便系统软件开发的原则，确定了打印驱动的硬件选型和方案的确定。

Measurement and Analysis of Thermal Loading of Cylinder Head of a Four-stroke Diesel Engine

四冲程柴油机气缸盖热负荷的测试与电算分析

Research on Thermal Loading in Head Multi-cylinder Gasoline Engine

多缸汽油机缸盖热负荷研究

Influence of Thermal Effect on Magnetic Head/ Disk of Gas Thin Film Lubrication

硬盘/磁头薄膜气体润滑中热效应影响分析

The constitution of micro-thermal printer based on Freescale S12 family of single-chip microcomputer is introduced. The operation principle of micro-thermal printer is described in detail. For the thermal head, the design of the protection and step motor drive module are implemented.

介绍了基于飞思卡尔S12系列单片机的微型热敏打印机的组成，详细分析了其工作原理，给出了热敏头过热保护以及步进电机驱动模块的设计与实现方式。

This monitoring device uses electric thermal couple as the head temperature sensor by finally actuating the LED displaying the measured results through cold-juncture compensation circuit, RC filter circuit, amplifier circuit and A/ D convert.

发动机缸盖温度监测仪采用热电偶作为缸盖温度传感器，通过冷端补偿电路，RC滤波电路、放大器电路、A/D转换器，最后驱动LED显示器显示测量结果。

Study on Thermal Load Upon Cylinder Head& Liner of LR 6105Q Diesel

LR6105Q柴油机气缸盖和气缸套热负荷研究

This paper presents the hardware and software design for the controlling thermal head according to its working principle and introduces its application in medical instrument.

阐述热印头的工作原理，热印头控制的软硬件设计及其在医学仪器中的应用。

Subregion Boundary Element Analysis of Thermal Loading of Cylinder Head of Diesel Engine

柴油机气缸盖热负荷的分区边界元分析

Research on the controlling thermal head and its application in medical instrument

热印头控制技术的研究及其在医学仪器中的应用

Based on the configuration and working principle of the thermal printing head ( TPH), the characteristics of the thermal units on TPH are analyses, and the method of measuring the thermal units' resistance is propose. The measuring results are given accordingly.

从热印头的结构与工作原理出发，分析了热印头发热元件的特点，提出了发热元件阻值的测试方法，给出了测量结果。

An improved thermal head boosts image quality.

经过改进的热敏头，提高了图像质量。